How to Get Hot Water Faster at Home | All the Options Analyzed

by Team MD

 

Getting splashed with cold water when all you want is a relaxing shower just before you go to bed is one of the worst experiences. If you want to learn how to get hot water faster, take a look at the following list of tips and tricks. 

 

Why is hot water not readily available?

There are numerous factors that might cause you to get frustrated because you always have to wait for hot water. Here is a list of some of the most common ones that you should be aware of. 

One of the most common issues, why you might have to wait for a while before you can enjoy a hot shower, is the fact that there is already water in the pipes. In other words, before you can use the hot water that you want so much, you have to wait for the cold water that is currently in the pipes to come out.

Another common reason might be the fact that there is quite a little bit of distance between your water heater and the faucet, sink, tub, or shower that you are using. So, if your water heater is in the basement, for instance, you will have to wait for a while for the hot water to reach the faucet. 

If you are using a volume restrictor for your pipes, you might also have to deal with water delay. Volume restrictors are usually fitted on showerheads and other fixtures to prevent water from being wasted. The delay caused by a volume restrictor can prove problematic, especially if there is a second factor that delays the hot water.

A malfunctioning water heater might also be a cause for your problem with water delay. If you have issues with your hot water, one thing that you can do is to have your water heater checked by a professional. On average, these devices have a lifespan of around 12 years, and they are also prone to breaking down due to a cumulus of factors. 

Another aspect that might compromise your hot water distribution is the buildup of sediment. As you know, water is rich in minerals such as magnesium and calcium. While it is not uncommon for the water to have minerals, hard water contains no less than 60 milligrams of dissolved minerals per liter. 

So, it should come as no surprise that, as time passes, part of these minerals are prone to build up in your water tank. As the capacity of the tank is limited due to the presence of the buildup of minerals, you are prone to have hot water management issues. 

Moreover, the size and the thickness of your pipes can also influence or lead to you experiencing hot water delivery issues. Pipes that are small in size can make it difficult for the hot water to make its way through in due time. Similarly, thick pipes that are made of metal such as copper might pull heat from the water as the water makes its way to the fixture that you are utilizing. 

If you live in an area where the temperatures drop significantly during the winter, you might also experience problems with your hot water. This happens because the water that enters your home does so at a very low temperature. As a result, your water heater has to work harder to heat it in the needed time.

 

How to get hot water faster?

According to the experts, there are several things that you can try to make sure that you get hot water every time you need it, without having to wait. Here some of the options you should consider.

 

Insulate your pipes

If you have checked your water installation and you have reached the conclusion that the main reason why you have issues with your hot water being delayed has to do with your pipes, the next logical step is to insulate them. 

Pipes that have been insulated are better at keeping the temperature of the water constant for a longer time. This way, you will always be provided with hot water whenever you need it. Some studies suggest that pipes that are insulated can maintain the temperature of water 2 to 4 degrees when compared to non-insulated pipes. Another advantage of insulated pipes is the fact that they are considerably quieter.   

 

Opt for a tankless water heater

If you have nothing against making a rather major change, you should consider the possibility of actually changing your water heater by replacing it with a tankless one. The major advantage that tankless heaters have is the fact that, as their name suggests, they do nor store any of the water that they heat.

Instead, every time you turn on a faucet or the shower, the water is quickly heated and delivered to you. Most of the units that you can find for sale have a rather considerable capacity as they can heat around two to five gallons of water each minute. 

Even though these devices are highly practical, they do not come cheap and, thus, they might not fit in your annual budget. However, if money is not a problem and you also see issues such as leakage and corrosion, opting for a product of this sort is one of the best decisions that you can make. 

 

Install a hot water recirculation pipe

One of the most popular devices the specialists recommend that you use if you are dealing with issues with your hot water is a recirculation pipe. A pipe of this sort has the purpose of circulating the unused water back to the water heater.

The biggest advantage of such a device is that, because it saves your water by recirculating it, such an investment is a good purchase for those interested in a product that can save you money. The specialists assert that a recirculation pipe can cut down between 60 and 80% of the time that you have to spend waiting for hot water.

Depending on the type of setup that you have, you can find numerous kinds of hot water recirculation pipes that you can use, from the faucet recirculation pump to electronic models. 

 

Replace your fixtures

If you have faucets with a low flow rate, another thing that you can do is to replace them with units that feature a higher flow rate. As you know, the flow rate of any fixture is measured in gallons per minute, or GPM. 

If you want to increase the flow of hot water in your home, get some new fixtures that have a low rate of around 2.5 GPM. One thing that you should remember before you make this change is that this decision will surely be reflected in your next water bill. 

Given that the main purpose of these fixtures is to reduce the amount of water that you use, replacing them with new ones that allow for more water to come through your pipes will, most likely, have a visible effect on your water bill. 

Still, one advantage of having higher pressure is that you will no longer have to waste your time waiting for the hot water to be available to you, an advantage that, for many, it is worth the extra money.

If you install new fixtures and you do not notice any differences when it comes to the supply of hot water that you get, you can always switch back to the previous fixtures. 

 

Don’t skip the annual maintenance work

One thing that people often do that can influence the time delivery of hot water is that they skip on the preventative maintenance work that they should do each year. As a result, they don’t catch the issues with the water piping system in time. Moreover, most consumers only deal with these issues when something breaks.

To avoid any unhappy and, at the same time, costly problems regarding your water fixtures, it is recommended that you hire a professional to come around each year to verify how your fixtures and your water heater work. 

This step is especially important if your water heater is slowly nearing the end of its intended lifespan. If you have the budget available, another thing that you can do is to have the device replaced altogether with a new one that is more cost-effective.

Some of the tell-tale signs that you should look for that might indicate that your heater has to be replaced are signs of rust, leakage, and a delay in the hot water supply time. If you notice any of these signs, we recommend that you go online and that you start looking for the best tater heating device that does not feature a tank. 

So, if you are now dealing with hot water problems, go ahead and use the aspects that we have presented as a checklist that you can utilize when trying to fix your issue. If you have little luck figuring out the problem by yourself, the next best thing is to hire a specialized firm to assess your water heating system and your fixtures.

 

 

Related Posts